产品展示
product

产品简介
特殊行程宇行气动执行器 Special strokes belef actuator profile工作技术条件 Operating conditions工作技术条件:1.使用介质:压缩空气、无腐蚀性气体和油;2.压力范围:双作用2-8(Bar),单作用2-8巴(Bar)3.工作温度:标准型(使用丁睛橡胶0型圈)-20℃-- +80℃低温型(使用硅橡胶0型圈)-40℃-- +80℃高温型(使用橄橡
article
技术文章特殊行程宇行气动执行器 Special strokes belef actuator profile | |
| 工作技术条件 Operating conditions 工作技术条件:1.使用介质:压缩空气、无腐蚀性气体和油;2.压力范围:双作用2-8(Bar),单作用2-8巴(Bar)3.工作温度:标准型(使用丁睛橡胶0型圈)-20℃-- +80℃低温型(使用硅橡胶0型圈)-40℃-- +80℃高温型(使用橄橡胶0型圈)-20℃-- +150℃4.行程调整:在90°位里有土4°的可调范围;5.润滑:在正常工作条件下,不需添加润滑剂;6.安装:适合室内或室外安装;7.最高使用压力:输入气压不超过8巴。Operating conditions:1 . Operating mediaDry or lubricated air, the non-corrosive gases or oil. 2. Air supply pressureDouble acting: 2-8 Bar; Spring return: 2-8 Bar 3. Operating temperatureStandard: -20 ℃ - +80 ℃Low temperature: -40℃-- +80℃High temperature: -20℃ +150℃ 4. Travel adjustmentHave adjustment range of ±4° for the rotation at 90° 5. LubricationUnder normal operating condition, need not accrete lubricant 6. ApplicationEither indoor or outdoor 7. Highest pressureThe maximum input pressure is 8 Bar | |
在线留言